#### PLEASE NOTE ##################################################
# #
# SECTIONS SURROUNDED BY "#"s ARE THERE TO EXPLAIN, IN DETAIL, #
# WHAT EACH SETTING IS USED FOR. #
# #
# THE ACTUAL SECTION SETTINGS WILL FOLLOW SHORTLY AFTER EACH #
# SETTING'S EXPLANATION. #
# #
###################################################################
<Login
# Hostname or IP address the login server will listen on.
# 0.0.0.0 will listen on all interfaces, so if you don't
# know, leave it as default!
host = "
xxxa.hopto.org"
# Port the login server listens on.
# Default login server port: 15100
port = "15100"
# Defines the level of content that will be shown.
LogLevel = "2"
# Enable automated IP bans of potential "bad people"?
# 0 = No (only if you have problems)
# 1 = Yes
AutoIPBanChecks="1"
# Defines the period of time (in minutes) between full account reloads.
# An account will not exist after a player has registered until an
# accounts reload has been performed.
ReloadPeriod = "3"
# If you set the billing server to point to the login server from another
# IP address, define it here. Otherwise, leave it as it is.
Aujard = "127.0.0.1"
# Use in-game news? To create news, use the "News Creator".
# 0 = No
# 1 = Yes
UseIngameNews = "0"
# Hi there! You're reading the configuration.
# Set Die to 0.
Die="0"
# Enable auto-registration? (Registers an account on login if it does not exist)
# 0 = No
# 1 = Yes
AutoRegister = "1"
# If auto-registration is enabled, and you have any required columns
# (columns that do not have a default value or do not have "Allow nulls" ticked)
# in TB_USER, you must specify them here as a continuation of the existing query:
#
# INSERT INTO TB_USER (strAccountID, strPasswd<HERE>)
# VALUES('user', 'pass'..);
AutoRegisterExtraColumns = ", strSocNo, iDays"
# If auto-registration is enabled, and you have any required columns
# (columns that do not have a default value or do not have "Allow nulls" ticked)
# in TB_USER, you must specify their intended value here as a continuation of the
# existing query:
#
# INSERT INTO TB_USER (strAccountID, strPasswd..)
# VALUES('user', 'pass'<HERE>);
AutoRegisterExtraValues = ", 1234, 6"
# Use the new/1.310 server-list structure?
# 0 = No (for servers prior to 1.310)
# 1 = Yes (for 1.310 servers)
NewServerList = "1">
<Database
# Your accounts database's datasource name
# This is the entry in the ODBC configuration that you
# have configured to point to the accounts database.
#
# If you are using a single database setup (ie: KN_Online),
# you'll use the DSN that points to your only database.
#
# If you're unsure, just keep it default and hope it works.
dsn = "KN_Online"
# The SQL username that has access to your accounts database.
# Default setups use "knight", so if you're unsure, just
# leave it as default and hope it works!
user = "knight"
# The password to the username above.
# If unsure, please leave it default.
pass = "knight"
# There are two definitions for the VERSION table.
# 0 = Uses shortened column names, ie: compname
# 1 = Uses proper column names, ie: strCompressedName
# The default applies to most setups.
VersionTable = "1"
# Hi there! You're reading the configuration.
# Set Die to 0.
Die="0"
# Use a stored procedure to handle any custom stuff?
# 0 = No
# 1 = Yes
# The login server already handles the login, so unless
# you have any extreme need to call the stored procedure,
# please leave it disabled!
UseAccountLogin = "0"
# The name of the stored procedure used by the above config
# option.
StoredProcedureName = "ACCOUNT_LOGIN"
# Hash passwords from the client?
# 0 = No
# 1 = Yes
HashPasswords = "0"
# Hash them using what?
# - "md5": Uses the in-built MD5 hasher.
# - "sha1": Uses the in-built SHA1 hasher.
# - "custom": Calls a custom T-SQL function, configured below.
HashType = ""
# If you are using the in-built MD5 or SHA1 hashers, you can
# seed the password make things harder for hackers.
# 0 = No
# 1 = Yes
SeedHashes = "0"
# If the above is enabled, specify the seed here.
# %s is the password, it MUST be kept in there somewhere.
# The surrounding text is the seed - you can move %s to any
# location inside that string.
HashSeed = "seed%shere">
<FTP
# 'URL' of the FTP server where the patches are hosted.
# In
ftp://ftp.your-site.net/abc/ the URL is ftp.your-site.net
url = "ftp.your-site.net"
# Relative path from the URL. Directory where the patches are.
# In
ftp://ftp.your-site.net/abc/ the path is /abc/
path ="/">
#### PLEASE NOTE ##################################################
# #
# THIS SECTION SHOULD ONLY BE CONFIGURED IF "HashType" WAS SET TO #
# "custom" IN THE DATABASE CONFIGURATION BLOCK! #
# #
# If you did not set it to "custom", then you may stop reading #
# and save & close the configuration file! You are done! #
# #
# With that said... #
# #
# The hash function is called with the password as the first #
# parameter. #
# #
# Each of the parameters below will be called consecutively, and #
# only in that order. #
# #
# If your function differs, please change the order of the #
# parameters in your T-SQL function to copy how they appear here. #
# #
# Order here: #
# 1. strPasswd #
# 2. strAccountID #
# 3. strClientIP #
# #
# Example of a hash function #
# This uses all parameters; you can disable account ID/IP below. #
# #
# CREATE FUNCTION MyHashFunc #
# ( #
# @strPasswd varchar(21), #
# @strAccountID varchar(21), #
# @strClientIP varchar(15) #
# ) RETURNS VARCHAR(1024) #
# AS #
# #
# You should also note that the maximum hash size is 1024 bytes, #
# which should be more than enough for anybody! #
# #
###################################################################
<HashFunction
# Name of the T-SQL hash function you want to call.
Name = "MyVeryOwnHashFunction"
# Pass account ID to function?
# 0 = No
# 1 = Yes
AccountName = "0"
# Pass client's IP address to function?
# 0 = No
# 1 = Yes
IPAddress = "0">
2.000.000 TL ⚔️ Ödüllü MYKOv2 GENESIS | 24 Nisan 2026 ⚔️ Resmi Açılış Başlıyor!
onlara kapak olur bu iş soacs xsip onlar mesele degil 
